{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide jobber drill 2,4 mm
Article no.: 122301 2,4
Article code:
- Tool material: Solid carbide
- Standard: DIN 338
- Type: N
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 2.4 mm | |
| Coating | TiN | |
| Tool material | Solid carbide | |
| Standard | DIN 338 | |
| Type | N | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 118 degrees | |
| recommended maximum drilling depth L2 | 26.4 mm | |
| Helix angle | 30 degrees | |
| Shank | Parallel shank to h7 | |
| Through-coolant | no | |
| Flute length Lc | 30 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 2.4 mm | |
| Shank tolerance | h7 | |
| Feed f in steel < 1100 N/mm2 | 0.05 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122301 2,4 | |
| EAN / GTIN | 4045197042293 | |
| Manufacturer number | 122301 2,4 |
Application Table
N
230
N
160
N
160
P
80
P
80
P
70
P
50
P
30
M
30
M
25
S
20
K
85
N
160
Description
Version:
Similar to DIN 338.
Nominal ⌀ and shank ⌀ equal.
TiN coating.
Nominal ⌀ and shank ⌀ equal.
TiN coating.
Note:
Flute length LC = L2 + 1.5 × DC.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide jobber drill 2,4 mm
on request
In stock
182 pieces in stock
BGN 28.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
570 pieces in stock
BGN 24.29
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
185 pieces in stock
BGN 36.22
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without |
| Overall length L | 57 | 57 | 57 |
| Standard | DIN 338 | DIN 338 | DIN 338 |
| Shank tolerance | h7 | h7 | h7 |
| Helix angle | 30 | 30 | 30 |
| Type | N | N | N |
| recommended maximum drilling depth L2 | 26.4 | 26.4 | 26.4 |