{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide hole saw flat 39 mm
Article no.: 118500 39
Article code:
- Tool material: Carbide
- Standard: Manufacturer’s standard
- Shank: Three drive flats shank
- ⌀ tolerance: −0.05 / 0.1
Product details
Technical Data
| Nominal ⌀ DC | 39 mm | |
| Version | flat | |
| Tool material | Carbide | |
| Standard | Manufacturer’s standard | |
| Shank | Three drive flats shank | |
| Shank ⌀ | 10 mm | |
| ⌀ tolerance | −0.05 / 0.1 mm | |
| Length L | 8 mm | |
| Colour ring | without | |
| Type of product | Hole saw |
Identification numbers & Classifications
| Article number | 118500 39 | |
| EAN / GTIN | 4045197037312 | |
| Manufacturer number | 118500 39 |
Application Table
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
Only for flat material up to 4 mm thickness.
Only for flat material up to 4 mm thickness.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Carbide hole saw flat 39 mm
on request
In stock
31 pieces in stock
BGN 158.34
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
59 pieces in stock
BGN 263.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
56 pieces in stock
BGN 75.12
plus VAT at the current rate
Prices plus delivery costs
|
|
| Length L | 8 | 35 | 11.8 |
| Nominal ⌀ DC | 39 | 39 | 39 |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Shank | Three drive flats shank | Three drive flats shank | Three drive flats shank |
| Tool material | Carbide | Carbide | Carbide |
| Shank ⌀ | 10 | 10 | 10 |
| Type of product | Hole saw | Hole saw | Hole saw |