{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill HSS-E VA, uncoated, ⌀ DC h8: 18,5mm
Article no.: 116360 18,5
Article code:
- Tool material: HSS E
- Standard: DIN 345
- Type: INOX
- Tolerance nominal ⌀: h8
- Point angle: 135
Product details
Technical Data
| Nominal ⌀ DC | 18.5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 345 | |
| Type | INOX | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 135 degrees | |
| Helix angle | 35-40 degrees | |
| Shank | Morse taper | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 107.3 mm | |
| Flute length Lc | 135 mm | |
| Overall length L | 233 mm | |
| Morse taper MT size | 2 | |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116360 18,5 | |
| EAN / GTIN | 4045197032034 | |
| Manufacturer number | 116360 18,5 |
Application Table
P
40
P
30
P
25
P
10
M
12
S
5
K
25
N
80
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Jobber drill HSS-E VA, uncoated, ⌀ DC h8: 18,5mm
on request
In stock
56 pieces in stock
BGN 208.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
51 pieces in stock
BGN 161.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
177 pieces in stock
BGN 70.17
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
94 pieces in stock
BGN 114.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
BGN 170.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
122 pieces in stock
BGN 80.75
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 |
| Coating | uncoated | uncoated | uncoated | uncoated | uncoated | uncoated |
| Shank | Morse taper | Plain shank | Morse taper | Morse taper | Morse taper | Plain shank |
| Tool material | HSS E | HSS | HSS | HSS | HSS | HSS |
| Point angle | 135 degrees | 118 degrees | 118 degrees | 118 degrees | 118 degrees | 118 degrees |
| Type | INOX | N | N | N | N | N |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. |