{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HSS jobber drill N 19 mm
Article no.: 116320 19
Article code:
- Tool material: HSS
- Norm: DIN 345
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 118
Product details
Technical Data
| Nominal ⌀ DC | 19 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Norm | DIN 345 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Helix angle | 20-30 degrees | |
| Shank | Morse taper | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 106.5 mm | |
| Flute length Lc | 135 mm | |
| Overall length L | 233 mm | |
| Morse taper MT size | 2 | |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116320 19 | |
| EAN / GTIN | 4045197029607 | |
| Manufacturer number | 116320 19 |
Application Table
P
40
P
30
P
25
K
25
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
HSS jobber drill N 19 mm
on request
In stock
430 pieces in stock
BGN 74.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
86 pieces in stock
BGN 172.74
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
130 pieces in stock
BGN 114.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
BGN 167.34
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
BGN 65.23
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
111 pieces in stock
BGN 87.50
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 |
| Coating | uncoated | uncoated | uncoated | uncoated | uncoated | uncoated |
| Overall length L | 233 | 198 | 233 | 269 | 127 | 198 |
| Norm | DIN 345 | DIN 338 | DIN 345 | DIN 341 | DIN 1897 | DIN 338 |
| Point angle | 118 | 118 | 118 | 118 | 118 | 118 |
| Type | N | N | N | N | N | N |
| recommended maximum drilling depth L2 | 106.5 | 106.5 | 106.5 | 142.5 | 35.5 | 106.5 |