{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HSS jobber drill N 18,5 mm
Article no.: 116320 18,5
Article code:
- Tool material: HSS
- Standard: DIN 345
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 118
Product details
Technical Data
| Nominal ⌀ DC | 18.5 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 345 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Helix angle | 20-30 degrees | |
| Shank | Morse taper | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 107.3 mm | |
| Flute length Lc | 135 mm | |
| Overall length L | 233 mm | |
| Morse taper MT size | 2 | |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116320 18,5 | |
| EAN / GTIN | 4045197029591 | |
| Manufacturer number | 116320 18,5 |
Application Table
P
40
P
30
P
25
K
25
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
HSS jobber drill N 18,5 mm
on request
In stock
184 pieces in stock
BGN 70.17
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
45 pieces in stock
BGN 161.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
BGN 114.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
35 pieces in stock
BGN 170.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
51 pieces in stock
BGN 65.23
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
BGN 80.75
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | uncoated | uncoated | uncoated | uncoated |
| Overall length L | 233 | 198 | 233 | 269 | 127 | 198 |
| Through-coolant | no | no | no | no | no | no |
| Standard | DIN 345 | DIN 338 | DIN 345 | DIN 341 | DIN 1897 | DIN 338 |
| Shank | Morse taper | Plain shank | Morse taper | Morse taper | Plain shank | Plain shank |
| Point angle | 118 | 118 | 118 | 118 | 118 | 118 |
| Feed f in steel < 750 N/mm2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |