{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Deep hole drill HSS-E, uncoated, ⌀ DC h8: 11,5mm
Article no.: 116061 11,5
Article code:
- Tool material: HSS E
- Standard: DIN 340
- Type: FS
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Nominal ⌀ DC | 11.5 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 340 | |
| Type | FS | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Helix angle | 38 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 110.8 mm | |
| Flute length Lc | 128 mm | |
| Overall length L | 195 mm | |
| Shank ⌀ Ds | 11.5 mm | |
| Feed f in steel < 500 N/mm2 | 0.2 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116061 11,5 | |
| EAN / GTIN | 4045197027047 | |
| Manufacturer number | 116061 11,5 |
Application Table
N
70
N
45
P
28
P
21
P
18
K
25
Description
Version:
Significantly strengthened core without taper.
Precision ground point.
With specially shaped slots. Designed for deep holes up to 10×D and materials with critical chip formation characteristics.
Precision ground point.
With specially shaped slots. Designed for deep holes up to 10×D and materials with critical chip formation characteristics.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Deep hole drill HSS-E, uncoated, ⌀ DC h8: 11,5mm
on request
In stock
54 pieces in stock
BGN 152.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
BGN 90.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
BGN 179.03
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 |
| Through-coolant | no | no | no |
| Nominal ⌀ DC | 11.5 mm | 11.5 mm | 11.5 mm |
| Point angle | 130 degrees | 130 degrees | 130 degrees |
| Tolerance nominal ⌀ | h8 | h8 | h8 |
| Flute length Lc | 128 mm | 128 mm | 128 mm |
| recommended maximum drilling depth L2 | 110.8 mm | 110.8 mm | 110.8 mm |