{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill long HSS N, uncoated, ⌀ DC h8: 6,5mm
Article no.: 116000 6,5
Article code:
- Tool material: HSS
- Standard: DIN 340
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 118
Product details
Technical Data
| Nominal ⌀ DC | 6.5 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 340 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 87.3 mm | |
| Flute length Lc | 97 mm | |
| Overall length L | 148 mm | |
| Shank ⌀ Ds | 6.5 mm | |
| Feed f in steel < 750 N/mm2 | 0.05 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116000 6,5 | |
| EAN / GTIN | 4045197025524 | |
| Manufacturer number | 116000 6,5 |
Application Table
N
64
N
52
N
40
P
40
P
30
P
25
K
25
Description
Version:
Vaporised from 2.4 mm. Particularly for deep hole drilling (for deep holes, repeated chip evacuation is necessary).
With point geometry shape A from size 4 mm.
With point geometry shape A from size 4 mm.
Advantage:
Especially suitable for long reach purposes. (When used to drill deep holes, low feed rates and frequent drill pecks are necessary).
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Jobber drill long HSS N, uncoated, ⌀ DC h8: 6,5mm
on request
In stock
3,701 pieces in stock
from
1
Pieces
BGN 15.92
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
BGN 13.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
170 pieces in stock
from
1
Pieces
BGN 43.32
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
BGN 36.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
407 pieces in stock
from
1
Pieces
BGN 11.50
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
BGN 9.58
plus VAT at the current rate
Prices plus delivery costs
|
|
| Through-coolant | no | no | no |
| Shank | Plain shank | Plain shank | Plain shank |
| Point angle | 118 degrees | 118 degrees | 118 degrees |
| Tolerance nominal ⌀ | h8 | h8 | h8 |
| Flute length Lc | 97 mm | 97 mm | 97 mm |
| Shank ⌀ Ds | 6.5 mm | 6.5 mm | 6.5 mm |
| recommended maximum drilling depth L2 | 87.3 mm | 87.3 mm | 87.3 mm |