{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Stub drill set HSS-E No. 113020, type FS with case 1-10
Article no.: 113520 1-10
Article code:
- Tool material: HSS E
- Standard: DIN 1897
- Type: FS
- Tolerance nominal ⌀: h8
- Point angle: 135
Product details
Technical Data
| Drill range | 1 mm - 10 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 1897 | |
| Type | FS | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 135 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Number of drills | 19 | |
| Incremental steps of drills | 0.5 mm | |
| with case | yes | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 113520 1-10 | |
| EAN / GTIN | 4045197008435 | |
| Manufacturer number | 113520 1-10 |
Application Table
N
70
N
45
P
40
P
30
K
25
Description
Version:
Made up of stub drills No. 113020.
Bright finish flutes, nitrided lands.
With point geometry shape C up to 3.9 mm; shape S (special) from 4 mm.
Bright finish flutes, nitrided lands.
With point geometry shape C up to 3.9 mm; shape S (special) from 4 mm.
Advantage:
Ideal for drilling shallow holes (approx. 2 - 4×D) on NC machines and automatic machines.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Stub drill set HSS-E No. 113020, type FS with case 1-10
on request
In stock
229 pieces in stock
BGN 327.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
BGN 211.42
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
46 pieces in stock
BGN 175.44
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
BGN 717.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
81 pieces in stock
BGN 757.97
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of drills | 19 | 19 | 19 | 19 | 19 |
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 |
| Through-coolant | no | no | no | no | no |
| Standard | DIN 1897 | DIN 338 | DIN 338 | DIN 338 | DIN 338 |
| Shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank |
| Point angle | 135 | 135 | 135 | 135 | 135 |
| Tolerance nominal ⌀ | h8 | h8 | h8 | h8 | h8 |