{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
POLIROLL PR cylindrical cartridge rolls dia. 9x25 mm hole dia. 3 mm ceramic oxide grain CO-COOL60
Artikelnummer: 4007220803325
Klantartikelnummer:
Let op de langere levertijd en beperkt advies:
Doordat het niet tot ons hoofdassortiment behoort en daardoor niet bij ons op voorraad is, bestellen wij dit artikel voor u rechtstreeks bij de fabrikant.
InfoProductdetails
Technische gegevens
| Rodzaj produktu | Abrasive roll |
Identificatienummers en classificaties
| Artikelnummer | 4007220803325 | |
| EAN/GTIN | 4007220803325 | |
| Nummer fabrikant | 42810846 |
Omschrijving
Opis:
For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding. POLIROLL cartridge rolls consist of spirally wound, coated abrasives. The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.
Cecha szcz.:
- RPM, max.: 23000 RPM
- RPM, optimum: 15000 RPM
- Abrasive: CO-COOL
- Dia. external, metric: 9 mm
- Grit size: 60
- Height: 25 mm
Zaleta:
- Consistently high grinding performance throughout its entire tool life thanks to ongoing exposure of fresh abrasive grain during application.
- Secure fit when in use due to self-tensioning provided by grooved, conical arbor.
- Easy tool change.
Zastosowanie:
- Recommendations for use: Grind with the point rather than the flat surface so as not to damage the bond through the effect of heat. Mount POLIROLL with the bonded side facing towards the arbor. Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
- Applications: Deburring; Step-by-step fine grinding; Leveling; Sharpening; Work on weld seams; Working on edges
- Drive types: Flexible shaft drive; Straight grinder
Materiał:
- Materials that can be worked:
- Aluminium
- Annealed cast iron
- Bronze
- Cobalt-based alloys
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Stainless steel (INOX)
- Titanium
- Materials that can be worked: Aluminium; Annealed cast iron; Bronze; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Titanium
Wskazówka:
- The maximum permitted peripheral speed is 11 m/s.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.