{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Pull stud 45° sealed 50
Artikelnummer: 308765 50
Klantartikelnummer:
- Aantrekbouten-norm: MAS 403
Productdetails
Technische gegevens
| Geschikt voor conus | 50 | |
| Boringeigenschap | met boring | |
| Aantrekbouten-norm | MAS 403 | |
| Kraag-⌀ D | 38 mm | |
| Kop-⌀ D1 | 23 mm | |
| Totale lengte L | 85 mm | |
| L1 | 45 mm | |
| Schroefdraad M | M24 | |
| Maximaal aanhaalmoment | 150 Nm | |
| Geschikt voor conus met kleurcode | SK 50 | |
| Sleutelwijdte | 30 mm | |
| Producttype | Aantrekbout |
Identificatienummers en classificaties
| Artikelnummer | 308765 50 | |
| EAN/GTIN | 4045197532749 | |
| Nummer fabrikant | 308765 50 |
Omschrijving
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.