{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Pull stud, 18CrNiMo7 Form A 40
Artikelnummer: 308605 40
Klantartikelnummer:
- Pull stud standard: ISO 7388-3
Productdetails
Technische gegevens
| suitable for steep tapers | 40 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 19 mm | |
| Overall length L | 54 mm | |
| L1 | 26 mm | |
| Thread M | M16 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Identificatienummers en classificaties
| Artikelnummer | 308605 40 | |
| EAN/GTIN | 4045197554529 | |
| Nummer fabrikant | 308605 40 |
Omschrijving
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
ISO 7388-3 meets the old standard DIN 69872.
Downloads en documenten
Vergelijk met soortgelijke producten
Dit artikel |
Aanbevelingen |
||
|---|---|---|---|
Pull stud, 18CrNiMo7 Form A 40
op aanvraag
Op voorraad
2.006 stuks direct leverbaar
£10.68
Excl. BTW
Excl. verzendkosten
|
|||
| Collar ⌀ D | 23 | 23 | 23 |
| Overall length L | 54 | 54 | 54 |
| maximum tightening torque | 50 | 50 | 50 |
| suitable for steep tapers | 40 | 40 | 40 |
| Width across flats | 19 | 19 | 19 |
| Angle A | 15 | 15 | 15 |
| Type of product | Pull Stud | Pull Stud | Pull Stud |