{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Spiraalboor met trappunt HSS N 5,5 mm
Artikelnummer: 114004 5,5
Klantartikelnummer:
- Snijmateriaal: HSS
- Norm: DIN 338
- Type: N
- Tolerantie nominale ⌀: h8
- Tophoek: 118
Offertes
Set met prijsvoordeel
Productdetails
Technische gegevens
| Nominale ⌀ DC | 5,5 mm | |
| Coating | ongecoat | |
| Snijmateriaal | HSS | |
| Norm | DIN 338 | |
| Type | N | |
| Tolerantie nominale ⌀ | h8 | |
| Tophoek | 118 graden | |
| Schacht | Drie-spanvlakkenschacht | |
| Aantal snijkanten Z | 2 | |
| Inwendige koeling | nee | |
| aanbevolen maximale boordiepte L2 | 48,8 mm | |
| Spaangroeflengte Lc | 57 mm | |
| Totale lengte L | 93 mm | |
| Schacht-⌀ Ds | 5,5 mm | |
| Voeding f in staal < 750 N/mm2 | 0,1 mm/omw. | |
| Gekleurde ring | zonder | |
| Producttype | Spiraalboor |
Identificatienummers en classificaties
| Artikelnummer | 114004 5,5 | |
| EAN/GTIN | 4062406877439 | |
| Nummer fabrikant | 114004 5,5 |
Toepassingstabel
N
70
N
70
N
50
P
30
P
27
P
22
P
10
K
25
N
50
Omschrijving
Version:
Chamfers are nitrided. Particularly sturdy and robust due to the strengthened core diameter. Ground flutes, with high concentricity. Precision ground point. Three drive flats on the shank for use in a 3-jaw chuck.
- Ideal for producing precise holes in sheet metal, pipes, and profiles.
- Reliable spot drilling without centring or centre punching – even on curved surfaces – thanks to innovative ground point.
- Oblique drilling possible without any problems after the first level of the drill tip has penetrated the material.
- Drilling with significantly less force required than with conventional DIN338 HSS drills – up to a diameter of 13 mm directly in the cordless drill/driver.
- Stable and secure form fit in the 3-jaw chuck.
- General use across a wide spectrum of materials including plastic, wood and acrylic without tearing or splintering.
- The drill does not rattle or dig in – even in the case of thin-walled materials.
- Burr-free drill exit.
- Ideal for drilling out bolts and rivets.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.