{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
KUB Pentron® indexable drill ABS® shank, 5×D, ⌀ DC: 39mm
Réf.: 236604 39
Référence:
- Drill depth for indexable insert drill up to: 5×D
- Shank: ABS
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Détails du produit
Caractéristiques techniques
| Series | KUB Pentron® | |
| Nominal ⌀ D | 39 | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ABS | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 195 mm | |
| Overhang LA | 238 mm | |
| ABS® shank ⌀ Ds | 63 mm | |
| ISO code indexable insert | SOGX 120408 42-... | |
| Pack of insert screws | 239652 20IP (6.3 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Numéros d’identification et classifications
| Référence article | 236604 39 | |
| EAN / GTIN | 4047109201132 | |
| Réf. fabricant | U45 63900 |
Description
Version:
Bore tolerance: D − 0.1 / + 0.35
Application:
Recommendation:
When spot-drilling reduce the feed rate to 70%.
Note:
- For use only under stable machining conditions.
- Version 2×D and 3×D with ABS® shank available on request.
- Offset-axis drilling up to Vmax = 0.25 mm.
- Maximum ⌀ = D + 0.5 mm achievable by offsetting.
- Version with PSC shank available on request.
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
KUB Pentron® indexable drill ABS® shank, 5×D, ⌀ DC: 39mm
Sur demande
Livrable en 1 à 2 semaines
0 article(s) en stock
US $ 975.00
+ TVA en vigueur
Prix et frais de livraison
|
Sur demande
Disponibilité
7 article(s) en stock
US $ 800.00
+ TVA en vigueur
Prix et frais de livraison
|
|
| Number of cutting edges Z | 1 | 1 |
| Through-coolant | yes | yes |
| ISO code indexable insert | SOGX 120408 42-... | SOGX 130511 |
| Shank | ABS | ISO 9766 |
| Pack of insert screws | 239652 20IP (6.3 Nm) | 239700 20IP (6.3 Nm) |
| Machining strategy | HPC | HPC |
| Overhang LA | 238 mm | 223 mm |