{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Cutting edge ⌀ DC | 20 mm | |
Number of cutting edges Z | 3 | |
Type de queue | avec filetage | |
Application de fraisage | Fraisage circulaire; Ramping; Tréflage | |
Méthode d'usinage | HPC | |
Through-coolant | yes | |
⌀ D3 | 13 mm | |
maximum cutting depth ap max | 1 mm | |
Overall length Ltot | 30 mm | |
Mounting thread M | M10 | |
Circular interpolation milling ⌀ Dmin | 33 mm | |
Circular interpolation milling ⌀ Dmax | 38 mm | |
Ramping angle αmax | 1.52 degrees | |
Ramping length L for αmax | 11.3 mm | |
suitable indexable insert | LOGU 0303.. | |
Insert screw | 229713 (8IP; 1.2 Nm) | |
Type de produit | Fraise à copier (RD..10) |
Référence article | 221960 20/3 | |
EAN / GTIN | 4960664741069 | |
Réf. fabricant | THN07506 |
This article |
Recommendations |
|
---|---|---|
![]() ![]() High feed rate milling cutter MFH mini 20/3 mm
Sur demande
Disponibilité
26 article(s) en stock
£186.93
+ TVA en vigueur
Prix et frais de livraison
|
Sur demande
Délai à confirmer
0 article(s) en stock
£183.24
+ TVA en vigueur
Prix et frais de livraison
|
|
Number of cutting edges Z | 3 | 3 |
Through-coolant | yes | yes |
suitable indexable insert | LOGU 0303.. | ANGX10T308ZE.R |
Shank type | avec filetage | with threaded shank |
Cutting edge ⌀ DC | 20 | 20 |
⌀ D3 | 13 | 14 |
Ramping angle αmax | 1.52 | 1.62 |