{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Il existe une alternative à ce produit
-
Réf.: 139675 12X1
Fraise à fileter GARANT Master TM 2×D, TiAlN, MF: 12X1
Réf.: 139665 12X1
Référence:
- Thread type: MF; MF-LH
- Flank angle: 60
- Tool material: Solid carbide
- Thread standard: DIN 13
- Shank: DIN 6535 HA to h6
Détails du produit
Caractéristiques techniques
| Thread size | M12×1 | |
| Coating | TiAlN | |
| Thread type | MF; MF-LH | |
| Flank angle | 60 degrees | |
| Tool material | Solid carbide | |
| Thread standard | DIN 13 | |
| Shank | DIN 6535 HA to h6 | |
| Thread pitch | 1 mm | |
| Nominal ⌀ DC | 9.95 mm | |
| Flute length Lc | 24.5 mm | |
| Shank length Ls | 40 mm | |
| Overall length L | 82 mm | |
| Shank ⌀ Ds | 10 mm | |
| Through-coolant | yes | |
| No. of teeth Z | 6 | |
| Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | |
| Spacing of the cutters | unequal spacing | |
| Feed fz in steel < 750 N/mm2 | 0.09 mm | |
| Number of clamping slots | 6 | |
| Colour ring | green | |
| Internal/external application | Indvendig | |
| Thread depth | 24.5 mm | |
| Series | Master TM | |
| Type of product | thread milling cutter |
Numéros d’identification et classifications
| Référence article | 139665 12X1 | |
| Réf. fabricant | 139665 12X1 |
Tableau d’application
N
220
N
220
N
180
P
140
P
130
P
120
P
90
P
80
H
45
H
85
H
50
M
82
M
75
S
50
K
120
N
200
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Through-coolant feed ≥ 4×0.5
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- New coating for optimum wear resistance.
- Corrected thread profile for avoidance of profile distortions.
Through-coolant feed ≥ 4×0.5
Note:
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Fraise à fileter GARANT Master TM 2×D, TiAlN, MF: 12X1
Sur demande
Non disponible
0 article(s) en stock
278,00 €
+ TVA en vigueur
Prix et frais de livraison
|
||
| Flank angle | 60 degrees | 60 degrees |
| Thread size | M12×1 | M12×1 |
| Thread standard | DIN 13 | DIN 13 |
| Nominal ⌀ DC | 9.95 mm | 7.95 mm |
| Tool material | Solid carbide | Solid carbide |
| Thread depth | 24.5 mm | 26.5 mm |
| Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | up to 2×D for blind holes; up to 2×D for through holes |