{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Machine tap HSS-E Form C G1/8
Réf.: 137450 G1/8
Référence:
- Thread type: G
- Flank angle: 55
- Tool material: HSS E
- Standard: DIN 5156
- Taper lead form: C
Détails du produit
Caractéristiques techniques
| Thread size | G1/8 | |
| Coating | vaporised | |
| Thread type | G | |
| Flank angle | 55 degrees | |
| Tool material | HSS E | |
| Standard | DIN 5156 | |
| Taper lead form | C | |
| Helix angle | 40 degrees | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.907 mm | |
| Threads per inch | 28 | |
| Thread ⌀ | 9.73 mm | |
| Overall length L | 90 mm | |
| Shank ⌀ Ds | 7 mm | |
| Shank square □ | 5.5 mm | |
| Tapping hole ⌀ | 8.8 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | blue | |
| Number of cutting edges Z | 3 | |
| Thread depth | 19.46 mm | |
| Type of product | Tap |
Numéros d’identification et classifications
| Référence article | 137450 G1/8 | |
| EAN / GTIN | 4045197079947 | |
| Réf. fabricant | 137450 G1/8 |
Tableau d’application
N
13
P
15
P
15
P
15
M
6
N
13
Description
Version:
Surface vaporised for reduced edge build-up.
HSS-E
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Machine tap HSS-E Form C G1/8 |
||
| Taper lead form | C | C |
| Type of threading tool | Machine tap for dynamic machining | Machine tap for dynamic machining |
| Thread pitch | 0.907 | 0.907 |
| Tapping hole ⌀ | 8.8 | 8.8 |
| Shank square □ | 5.5 | 5.5 |
| Helix angle | 40 | 40 |
| Application for type of drilling | up to 2×D for blind holes | up to 2.5×D for blind holes |