{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
HOLEX Pro Steel solid carbide drill, plain shank DIN 6535 HA 1
Réf.: 122501 1
Référence:
- Tool material: Solid carbide
- Standard: DIN 6537 K
- Version: 4×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Détails du produit
Caractéristiques techniques
| Series | Pro Steel | |
| Nominal ⌀ DC | 1 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 K | |
| Version | 4×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 4.5 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 6 mm | |
| Overall length L | 45 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed f in steel < 900 N/mm2 | 0.05 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Numéros d’identification et classifications
| Référence article | 122501 1 | |
| EAN / GTIN | 4045197823953 | |
| Réf. fabricant | 122501 1 |
Tableau d’application
P
115
P
105
P
85
P
80
P
60
M
30
M
25
K
90
K
55
Description
Version:
Straight major cutting edges and a special flute profile ensure a good chip evacuation. The robust cutter geometry ensures high-performance drilling with good process reliability.
A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating.
Up to ⌀ 1.9 with 4 facets, from ⌀ 2 with relieved cone.
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Straight major cutting edges with slightly honed edges and special flute profile produce short chips.
A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating.
Up to ⌀ 1.9 with 4 facets, from ⌀ 2 with relieved cone.
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Straight major cutting edges with slightly honed edges and special flute profile produce short chips.
Note:
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
HOLEX Pro Steel solid carbide drill, plain shank DIN 6535 HA 1
33,10 €
+ TVA en vigueur
Prix et frais de livraison
|
Sur demande
Disponibilité
40 article(s) en stock
390,37 DKK
+ TVA en vigueur
Prix et frais de livraison
|
|
| Semi-standard | yes | ja |
| Antal skær Z | 2 | 2 |
| Belægning | TiAlN | TiAlN |
| Farvering | green | rød |
| Norm | DIN 6537 K | DIN 6537 K |
| Skaft | DIN 6535 HA to h6 | DIN 6535 HA med h6 |
| Skæremateriale | Solid carbide | HM |