{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
HiPer-Drill Grundelement 33 mm
Artikel-Nr.: 231605 33
Sachnummer:
- Ausführung: 3×D
- Schaft: ISO 9766
- Bohrverwendung: bedingt Querbohren; bedingt Paketbohren; bedingt schräger Austritt; bedingt schräg Anbohren
- Anzahl Schneiden Z: 2
- Innenkühlung: ja
Produktdetails
Technische Daten
| Serie | HiPer-Drill | |
| Ausführung | 3×D | |
| Schaft | ISO 9766 | |
| Bohrverwendung | bedingt Querbohren; bedingt Paketbohren; bedingt schräger Austritt; bedingt schräg Anbohren | |
| Anzahl Schneiden Z | 2 | |
| Innenkühlung | ja | |
| ⌀-Bereich Dc | 33 mm - 33,99 mm | |
| Nutzlänge L1 | 102 mm | |
| Schaft-⌀ Ds | 32 mm | |
| Schaftlänge Ls | 60 mm | |
| Spannschraube | 231999 20IP (7,5 Nm) | |
| Gesamtlänge L | 209 mm | |
| Produktart | Wendeplattenbohrer |
Identifikationsnummern & Klassifikationen
| Artikelnummer | 231605 33 | |
| EAN / GTIN | 4045197725936 | |
| Herstellernummer | 231605 33 |
Beschreibung
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.