{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
Metallkreissägeblatt grob HZ, unbeschichtet, ⌀×Stärke: 160X1,2mm
Artikel-Nr.: 176000 160X1,2
Sachnummer:
Bild zum Vergrößern anklicken
Bild zum Vergrößern anklicken
Arbors for saw blades ⌀ 20 - 63 mm see No. 345510 / 345555
Bild zum Vergrößern anklicken
Bild zum Vergrößern anklicken
Bild zum Vergrößern anklicken
Bild zum Vergrößern anklicken
- Schneidstoff: HSS
- Norm: DIN 1838
Produktdetails
Technische Daten
| ⌀ | 160 mm | |
| Stärke | 1,2 mm | |
| Beschichtung | unbeschichtet | |
| Schneidstoff | HSS | |
| Norm | DIN 1838 | |
| Bohrungs-⌀ | 32 mm | |
| Zähnezahl Z | 80 | |
| geeignet für Material | Metall | |
| Innenkühlung | nein | |
| Produktart | Kreissägeblatt |
Identifikationsnummern & Klassifikationen
| Artikelnummer | 176000 160X1,2 | |
| EAN / GTIN | 4045197244710 |
Anwendertabelle
N
800
N
600
P
37
P
22
P
20
P
15
M
11
M
11
K
27
N
400
Beschreibung
Version:
All blades are hollow ground to give side clearance. All sizes with 200 mm ⌀ and very thin blades have a bore collar for stabilisation. Accuracy, tooth form, and side clearance grinding according to DIN 1840.
DIN 1838 C coarse-toothed with curved form C. High performance tooth pitch (HZ) with high teeth and lower finishing teeth. The roughing tooth is 0.15 – 0.30 mm higher than the finishing tooth and is chamfered at both tooth corners. In this way both types of teeth share the cutting work.
DIN 1838 C coarse-toothed with curved form C. High performance tooth pitch (HZ) with high teeth and lower finishing teeth. The roughing tooth is 0.15 – 0.30 mm higher than the finishing tooth and is chamfered at both tooth corners. In this way both types of teeth share the cutting work.
Application:
Particularly suitable for cutting workpieces with low to medium tensile strength. High cutting performance due to the chip breaking tooth form.
Please note: If the component is not cut through, but only cut into, the bottom of the cut will have an additional slot due to the projecting high tooth.
Please note: If the component is not cut through, but only cut into, the bottom of the cut will have an additional slot due to the projecting high tooth.
Note:
The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.