{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
Torque screwdriver with scale, to take interchangeable blades 500 cNm
Artikel-Nr.: 659957 500
Sachnummer:
- Aanhaalrichting: Rechtsom aanhalen
- Meetnauwkeurigheid draaimoment: ±6
- Testrapport: Testrapport van de producent
Produktdetails
Technische Daten
| maximaal draaimoment | 500 cNm | |
| Aanhaalrichting | Rechtsom aanhalen | |
| Meetnauwkeurigheid draaimoment | ±6 % | |
| Testrapport | Testrapport van de producent | |
| Totale lengte L | 124 mm | |
| Draaimomentbereik | 100 cNm - 500 cNm | |
| Draaimomentbereik | 1 Nm - 5 Nm | |
| Schaalverdeling 1 maatstreep = | 10 cNm | |
| Geschikte verwisselbare stelen | 6 mm | |
| Weergave | analoog | |
| Aanduiding ontkoppeling | akoestisch; haptisch | |
| Activeringsprincipe | met kleinere vrije slag, mechanisch | |
| Aansluitingsvorm | verwisselbare steel | |
| Meettechniek | Mechanisch | |
| Vast ingesteld draaimoment | nee | |
| Gegevens rapporteerbaar | nee | |
| Instelling van de activeringswaarde | met instelschaal | |
| Feedback | ontkoppelend | |
| Meetmethode | Draaimoment | |
| Verstelbaarheid activeringswaarde | verstelbaar | |
| Norm | DIN EN ISO 6789 | |
| Producttype | momentschroevendraaier |
Identifikationsnummern & Klassifikationen
| Artikelnummer | 659957 500 | |
| EAN / GTIN | 7610733291717 | |
| Herstellernummer | 8317.A 1,0-5,0 NM |
Beschreibung
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.