{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
KYOCERA Hochvorschubfräser MFH Harrier mit Zylinderschaft, für Wendeschneidplatten SO.., ⌀ D / Anzahl Schneiden Z 28/2L mm
Artikel-Nr.: 222050 28/2L
Sachnummer:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Produktdetails
Technische Daten
| Cutting edge ⌀ DC | 28 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 11 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 200 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 39 mm | |
| Circular interpolation milling ⌀ Dmax | 54 mm | |
| Ramping angle αmax | 1.98 degrees | |
| Ramping length L for αmax | 10.4 mm | |
| suitable indexable insert | SOMT.. | |
| Indexable insert size | 10 | |
| Insert screw | 229717 (15IP; 3.5 Nm) | |
| Setting angle κ | 10 degrees | |
| Type of product | Copy mill |
Identifikationsnummern & Klassifikationen
| Artikelnummer | 222050 28/2L | |
| EAN / GTIN | 4960664707584 | |
| Herstellernummer | THN07642 |
Beschreibung
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.