{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
eLevel+ workstation with ESD coating 1000 mm
Article no.: 972015 1000
Article code:
Click to enlarge image
Click to enlarge image
Detail – control panel
Click to enlarge image
Rear panel with integral cable duct.
Click to enlarge image
eLevel+ levels only the worktop - the remainder of the workstation remains unchanged.
Click to enlarge image
Click to enlarge image
- Design version: Steel hollow section construction
- Height adjustment workstation: 670-990
- Workbench/desk load capacity - maximum distributed load (on wood): 250
- Type of height adjustment: electrical
- Insert thickness: 40
Product details
Technical Data
| Design version | Steel hollow section construction | |
| Height adjustment workstation | 670-990 mm | |
| Workbench/desk load capacity - maximum distributed load (on wood) | 250 kg | |
| Type of height adjustment | electrical | |
| Insert thickness | 40 mm | |
| Height adjustment | 25 mm | |
| electrostatic characteristic | EGB/ESD | |
| Model | eLevel+ | |
| Series | Workstation | |
| Height adjustment range (worktop surface) from − to | 670 mm - 990 mm | |
| Width | 1,000 mm | |
| Depth | 800 mm | |
| Worktop length | 1,000 mm | |
| Worktop depth | 700 mm | |
| Worktop thickness | 40 mm | |
| Principle of height adjustment | only the worktop | |
| Stepless height adjustment | yes | |
| Plug type, input | F | |
| Nominal voltage | 250 V | |
| Material of worktop | ESD worktop | |
| Worktop covering | HPL plastic, conductive | |
| Coating thickness | 0.8 mm | |
| Colour of worktop surface | light grey RAL 7035 | |
| Control panel with display and memory functions | yes | |
| Weight | 78 kg | |
| Type of product | Work table |
Identification numbers & Classifications
| Article number | 972015 1000 | |
| EAN / GTIN | 4062406167066 | |
| Manufacturer number | 972015 1000 |
Description
Version:
eLevel+ workstation, ESD conductive according to DIN EN 61340-5-1. With continuous electrical adjustment for height. Height adjustment by pushbutton. Push-button adjustment for a suitable worktop height. All-round 3 mm antistatic ABS edge band. Central grounding point underneath the ESD worktop. The support legs are not used for earthing.
Note:
All plastic components (e.g. covering caps) are not ESD conductive.
- If using casings attached to the underside of the worktop, note that such casings may not exceed a maximum height of 500 mm.
- Caution: when installing benches in a row, please use side plates no. 972019 (crush hazard).