{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Tap extension 2
Article no.: 338400 2
Article code:
Product details
Technical Data
| for thread nominal ⌀ d1 DIN 371 | M3 | |
| for thread nominal ⌀ d1 DIN 374/376 | M4.5 − M5 | |
| for thread shank ⌀ d2 | 3.5 mm | |
| for square K1 | 2.7 mm | |
| for clamping length l1 | 23 mm | |
| Extension ⌀ D3 | 6 mm | |
| Extension ⌀ D4 | 7.5 mm | |
| Extension K2 | 4.9 mm | |
| Extension L2 | 60 mm | |
| Extension L3 | 130 mm | |
| Type of product | Extension |
Identification numbers & Classifications
| Article number | 338400 2 | |
| EAN / GTIN | 4045197336613 | |
| Manufacturer number | 338400 2 |
Description
Version:
- Long and extra long version.
- The front end of the extension acts as a collet. The collet is clamped to the tap by hand-tightening the knurled clamping nut.
- The drive torque is transmitted via the square drive.
- The rear part of the extension is to DIN, so that the extension can be mounted in quick-change tapping collets or ER tapping collets with a square drive.
Application:
For tapping in confined places, such as recesses, offsets, sharp edges on jigs, extremely deep internal threads, or directly into casting walls.
Note:
Alternative hexagon collet for fixing the tap available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Tap extension 2
on request
Subsequent delivery
0 pieces in stock
US $ 189.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1 pieces in stock
US $ 225.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
US $ 225.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
US $ 218.17
plus VAT at the current rate
Prices plus delivery costs
|
|
| for thread nominal ⌀ d1 DIN 371 | M3 | M3 | M3 | M3 |
| for thread nominal ⌀ d1 DIN 374/376 | M4.5 − M5 | M4.5 − M5 | M4.5 − M5 | M4.5 − M5 |
| Extension ⌀ D3 | 6 | 6 | 6 | 12 |
| Extension K2 | 4.9 | 4.9 | 4.9 | 9 |
| Extension L2 | 60 | 60 | 60 | 45 |
| Extension L3 | 130 | 130 | 130 | 145 |
| for thread shank ⌀ d2 | 3.5 | 3.5 | 3.5 | 3.5 |