{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Three-jaw lathe chuck with recessed steel mount 250 mm
Article no.: 310500 250
Article code:
Find similar products here:
Product details
Technical Data
| Standard | DIN 702-4 | |
| Material | Steel | |
| External ⌀ A | 250 mm | |
| Aperture E | 76 mm | |
| Height without jaws H1 | 82 mm | |
| Height with jaws H2 | 122 mm | |
| Centring ⌀ B | 200 mm | |
| Centring depth C | 5 mm | |
| Chuck key square K | 12 mm | |
| Weight | 25.7 kg | |
| maximum speed | 3,000 rpm | |
| Colour code for accessories | Röhm geared scroll chucks and jaws | |
| Type of product | Gear scroll chucks |
Identification numbers & Classifications
| Article number | 310500 250 | |
| Manufacturer number | 100533 |
Description
Version:
- Manual chucks with gear scroll, centrically clamping.
- Body made of cast iron or steel.
- Gear scroll drop-forged, balanced, and hardened.
- Flanks of scroll and of jaw serrations are ground.
- High concentricity.
Application:
For machine spindles with recessed centring mount or for mounting using a flange. Secured with screws from the rear. The flange blanks must always be fitted first to the machine and then to the chuck.
Standard:
DIN 702-4.
Supplied with:
1 set = 3 hard inside jaws, stepped on the outside and 1 set = 3 hard outside jaws, stepped on the inside.
1 clamping wrench and fastening screws or studs depending on the chuck.
1 clamping wrench and fastening screws or studs depending on the chuck.