{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Short keyway broaching toolholder ⌀ DS 16 mm, from slot width m: 2mm
Article no.: 290357 2
Article code:
- Through-coolant: yes
Product details
Technical Data
| Shank ⌀ | 16 mm | |
| Through-coolant | yes | |
| suitable for slot width m | 2 mm | |
| Reach L1 | 17.5 mm | |
| Tool holder ⌀ D1 | 6.5 mm | |
| Centre offset L3 | 3.65 mm | |
| Min. pre-drilling -⌀ Dmin | 7.03 mm | |
| Screw | 290399 1 | |
| Shank length Ls | 40 mm | |
| Shank | Combination shank | |
| Type of product | Keyway broaching and profile slotting tool |
Identification numbers & Classifications
| Article number | 290357 2 | |
| EAN / GTIN | 4062406099268 | |
| Manufacturer number | 290357 2 |
Description
Attention:
Always use the minimum pre-drill ⌀ to match the slot width (e.g. for slot width 14 mm, minimum pre-drill ⌀ = 38.22 mm).
Note:
- Individual holder sizes are for different slot widths. In such cases, where possible, always use the optimum combination of holder and cutting insert (identical size) for maximum stability.
- For lathes without Y-axis, please use eccentric bush No. 290391− 290393 for exact setting of the Y-coordinate.
- For machining centres, use the alignment aid No. 290397 and a dial indicator to check the spindle orientation.