{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KOMET REAMAX® TS reaming head H7 Cermet ASG3000, DST, Nominal ⌀ D: 20mm
Article no.: 239811 20
Article code:
- Hole tolerance: H7
- Application for type of drilling: for blind holes and through holes
- Innenkühlung: yes
Product details
Technical Data
| Nenn-⌀ D | 20 mm | |
| Beschichtung | DST | |
| Hole tolerance | H7 | |
| Application for type of drilling | for blind holes and through holes | |
| Innenkühlung | yes | |
| for holders No. 239880 − 239940 | 20 − 21.99 | |
| Cutter length l1 | 6 mm | |
| Head length l | 20 mm | |
| Number of cutting edges Z | 6 | |
| Vorschub f in Stahl < 750 N/mm2 | 0.8 mm/rev. | |
| Type of product | Cutter insert for reaming |
Identification & Classification
| Article number | 239811 20 | |
| EAN / GTIN | 4047109229167 | |
| Manufacturer number | 75J.93.20H7N | |
| Manufacturer | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 BESIGHEIM, Germany, www.kometgroup.com |
Application Table
P
180
P
160
P
140
P
100
K
140
Description
Version:
Reaming heads finish ground for fit H7.
Cutter geometry matched to the application. Adjustable down to the µm range for wear compensation and for very tight basic tolerances down to IT4. For use in through holes up to 5×D.
In geometry ASG3000 with lead angle 45° and additional chip flute for positive chip clearance along the cutting edge. For blind and through holes.
Cutter geometry matched to the application. Adjustable down to the µm range for wear compensation and for very tight basic tolerances down to IT4. For use in through holes up to 5×D.
In geometry ASG3000 with lead angle 45° and additional chip flute for positive chip clearance along the cutting edge. For blind and through holes.