{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH Harrier 32/3 mm
Article no.: 222055 32/3
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Weldon shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 15 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overhang L1 | 70 mm | |
| Overall length Ltot | 131 mm | |
| Shank ⌀ Ds h6 | 32 mm | |
| Circular interpolation milling ⌀ Dmin | 47 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Ramping angle αmax | 1.43 degrees | |
| Ramping length L for αmax | 14.4 mm | |
| suitable indexable insert | SOMT.. | |
| Indexable insert size | 10 | |
| Insert screw | 229717 (15IP; 3.5 Nm) | |
| Setting angle κ | 10 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222055 32/3 | |
| EAN / GTIN | 4960664707546 | |
| Manufacturer number | THN07633 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
High feed rate milling cutter MFH Harrier 32/3 mm
on request
In stock
2 pieces in stock
US $ 422.46
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
US $ 368.51
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
US $ 397.51
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 70 | 40 | 40 |
| Setting angle κ | 10 | 16 | 15 |
| Milling application | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging |
| Overall length Ltot | 131 | 100 | 100 |
| suitable indexable insert | SOMT.. | XDM.090416 | XOMU094812 |
| Shank type | Weldon shank | Weldon shank | Weldon shank |
| Ramping length L for αmax | 14.4 | 17.43 | 19.55 |