{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 42 mm | |
Number of cutting edges Z | 7 | |
Shank type | with bore | |
Milling application | Plunging; Ramping; Circular milling | |
Through-coolant | yes | |
Machining strategy | HPC | |
⌀ D3 | 35 mm | |
maximum cutting depth ap max | 1 mm | |
Overall length Ltot | 40 mm | |
Mounting bore ⌀ | 16 mm | |
Circular interpolation milling ⌀ Dmin | 77 mm | |
Circular interpolation milling ⌀ Dmax | 82 mm | |
Ramping angle αmax | 0.52 degrees | |
Ramping length L for αmax | 33.3 mm | |
suitable indexable insert | LOGU 0303.. | |
Insert screw | 229713 (8IP; 1.2 Nm) | |
Setting angle κ | 15 degrees | |
Fz Helix | 0.8 | |
Type of product | Copy mill |
Article number | 221965 42/5 | |
EAN / GTIN | 2050002058767 | |
Manufacturer number | TX782236 |
This article |
Recommendations |
|
---|---|---|
High feed rate milling cutter MFH mini, with bore, ⌀ D / number of effective cutting edges Z: 42/5mm |
on request
In stock
7 pieces in stock
US $ 372.14
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 7 | 5 |
Mounting bore ⌀ | 16 mm | 16 mm |
Milling application | Plunging; Ramping; Circular milling | End milling; Ramping; End milling |
Overall length Ltot | 40 mm | 40 mm |
suitable indexable insert | LOGU 0303.. | CPHX 09T3.. |
Machining strategy | HPC | HPC |
maximum cutting depth ap max | 1 mm | 3 mm |