{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter compacting cut, Diamond, ⌀ h10 DC: 6mm
Article no.: 209535 6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Tolerance nominal ⌀: h10
- No. of teeth Z: 8
- Direction of infeed: horizontal, oblique and vertical
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | Diamond | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 8 | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | no | |
| Flute length Lc | 28 mm | |
| Overall length L | 75 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.12 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in GRP CRP | 0.04 mm | |
| Feed fz for slot milling in graphite | 0.04 mm | |
| Colour ring | black | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 209535 6 | |
| EAN / GTIN | 4045197478368 | |
| Manufacturer number | 209535 6 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
200
N
190
N
170
N
150
N
180
N
160
N
350
N
190
N
190
N
340
N
Description
Version:
High performance geometry with multiple teeth for extremely high material removal rates in a single pass.
Left-hand helix, compacting cut. The material is pushed down on to the substrate. Highly suitable for thin materials.
Left-hand helix, compacting cut. The material is pushed down on to the substrate. Highly suitable for thin materials.