{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide ball nose slot drill 16 mm
Article no.: 207115 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Radius R | 8 mm | |
| Overhang length L1 incl. recess | 32 mm | |
| Recess ⌀ D1 | 15.7 mm | |
| Overall length L | 82 mm | |
| Shank ⌀ Ds | 16 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.1 mm | |
| Feed fz for copy milling in steel < 900 N/mm2 | 0.113 mm | |
| Colour ring | without | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207115 16 | |
| EAN / GTIN | 4045197229588 | |
| Manufacturer number | 207115 16 |
Application Table
N
350
N
250
P
160
P
140
P
130
P
80
P
70
H
50
M
80
M
70
K
120
N
320
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide ball nose slot drill 16 mm
on request
In stock
11 pieces in stock
US $ 165.06
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
131 pieces in stock
US $ 103.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
US $ 227.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
76 pieces in stock
US $ 243.31
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | 0.05×D for copy milling ;0.05×D for side milling | 0.05×D for copy milling ;0.05×D for side milling | 0.5×D for side milling ;0.03×D for copy milling | 0.2×D for side milling ;0.05×D for copy milling |
| Colour ring | without | without | without | red |
| Overall length L | 82 | 82 | 82 | 82 |
| Radius R | 8 | 8 | 8 | 8 |
| Cutting edge ⌀ DC | 16 | 16 | 16 | 16 |
| Flute length Lc | 22 | 22 | 22 | 22 |
| Tolerance nominal ⌀ | f8 | h10 | f8 | f8 |