{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide torus cutter HPC 10/0,5 mm
Article no.: 206323 10/0,5
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / −0.02
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / −0.02 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 10 mm | |
| Corner radius R1 | 0.5 mm | |
| Overhang length L1 incl. recess | 30 mm | |
| Recess ⌀ D1 | 9.7 mm | |
| Overall length L | 73 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed fz for side milling in steel < 70 HRC | 0.07 mm | |
| Feed fz for copy milling in steel < 70 HRC | 0.07 mm | |
| Shank tolerance | h6 | |
| Colour ring | red | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 206323 10/0,5 | |
| EAN / GTIN | 4045197641113 | |
| Manufacturer number | 206323 10/0,5 |
Application Table
H
150
H
110
H
90
H
80
Description
Version:
GARANT Diabolo 70:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability.
Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerances:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability.
Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerances:
- Corner radius: R1 = ±0.01 mm.
Application:
Due to the special hard geometry ideal for use on hardened materials from 60 HRC to 70 HRC.