{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 10 mm | |
Coating | DLC | |
Tool material | solid carbide | |
Standard | Manufacturer’s standard | |
Milling profile | WR | |
Tolerance nominal ⌀ | d11 | |
No. of teeth Z | 3 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 22 mm | |
Overhang length L1 incl. recess | 32 mm | |
Recess ⌀ D1 | 9.8 mm | |
Overall length L | 72 mm | |
Shank ⌀ Ds | 10 mm | |
Corner chamfer width at 45° | 0.55 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.07 mm | |
Feed fz for side milling in short-chipping aluminium | 0.09 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 205331 10 | |
EAN / GTIN | 4045197767226 | |
Manufacturer number | 205331 10 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Solid carbide roughing end mill, DLC, ⌀ d11 DC: 10mm
on request
In stock
134 pieces in stock
US $ 94.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
US $ 65.57
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
92 pieces in stock
US $ 142.58
plus VAT at the current rate
Prices plus delivery costs
|
GARANT Master Titan solid carbide milling cutter with more chip separators TPC, TiAlN, ⌀ e8 DC: 10mm
on request
In stock
26 pieces in stock
US $ 115.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
256 pieces in stock
US $ 127.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
97 pieces in stock
US $ 152.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
127 pieces in stock
US $ 85.05
plus VAT at the current rate
Prices plus delivery costs
|
|
Overhang length L1 incl. recess | 32 mm | 32 mm | 32 mm | 30 mm | 30 mm | 30 mm | 30 mm |
Coating | DLC | uncoated | TiAlN | TiAlN | DLC | DLC | uncoated |
Colour ring | yellow | yellow | pink | pink | yellow | yellow | yellow |
Through-coolant | no | no | no | no | no | yes | no |
Tool material | solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
Helix angle | 30 degrees | 30 degrees | 40 degrees | 40 degrees | 35 degrees | 35 degrees | 45 degrees |
Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |