{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter HPC / TPC, TiAlN, ⌀ DC: 16mm
Article no.: 203373 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / -0.03
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / -0.03 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.02×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC; TPC | |
| Flute length Lc | 66 mm | |
| Overall length L | 130 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 70 HRC | 0.15 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 203373 16 | |
| EAN / GTIN | 4045197641342 | |
| Manufacturer number | 203373 16 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
90
H
60
H
50
H
45
Description
Version:
GARANT Diabolo 70:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
- Size nominal ⌀: DC ≤ size 12: 0 / −0.02 mm;
- Size nominal ⌀: DC from size 16: 0 / -0.03 mm.
Application:
Due to the special hard geometry ideal for use on hardened materials from 60 HRC to 70 HRC.
For profile milling as a finishing operation.
(Plunge milling only to shallow depths).
For profile milling as a finishing operation.
(Plunge milling only to shallow depths).
Note:
For materials > 65 HRC: ae = 0.02×D.