{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter HPC / TPC 12 mm
Article no.: 203373 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / -0.02
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / -0.02 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.02×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC; TPC | |
| Flute length Lc | 56 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 70 HRC | 0.136 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203373 12 | |
| EAN / GTIN | 4045197641335 | |
| Manufacturer number | 203373 12 |
Application Table
H
90
H
60
H
50
H
45
Description
Version:
GARANT Diabolo 70:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
- Size nominal ⌀: DC ≤ size 12: 0 / −0.02 mm;
- Size nominal ⌀: DC from size 16: 0 / -0.03 mm.
Application:
Due to the special hard geometry ideal for use on hardened materials from 60 HRC to 70 HRC.
For profile milling as a finishing operation.
(Plunge milling only to shallow depths).
For profile milling as a finishing operation.
(Plunge milling only to shallow depths).
Note:
For materials > 65 HRC: ae = 0.02×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide milling cutter HPC / TPC 12 mm
on request
Subsequent delivery
0 pieces in stock
US $ 477.48
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
162 pieces in stock
US $ 295.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
154 pieces in stock
US $ 93.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | red | red | red |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Helix angle | 45 | 45 | 45 |
| Type | H | H | H |
| No. of teeth Z | 6 | 6 | 6 |
| Direction of infeed | horizontal and oblique | horizontal and oblique | horizontal and oblique |
| Type of product | End / face mill | End / face mill | End / face mill |