{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill 18 mm
Article no.: 203240 18
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: H
- Tolerance nominal ⌀: h10
- No. of teeth Z: 8
Product details
Technical Data
| Cutting edge ⌀ DC | 18 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | H | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 8 | |
| Helix angle | 50 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 32 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 18 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 55 HRC | 0.05 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203240 18 | |
| EAN / GTIN | 4045197119049 | |
| Manufacturer number | 203240 18 |
Application Table
P
160
P
95
P
85
H
75
H
65
H
50
H
30
Description
Version:
Strengthened core and geometry for hard machining, without dynamic helical pitch.
Application:
For profile milling as finishing.
(Plunge cutting only to shallow depths).
(Plunge cutting only to shallow depths).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide end mill 18 mm
on request
In stock
13 pieces in stock
US $ 190.13
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
£255.08
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
£325.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
£150.69
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | 0.05×D for side milling | 0.05×D for side milling | 0.05×D for side milling | 0.05×D for side milling |
| Overall length L | 92 mm | 92 mm | 114 mm | 114 mm |
| Standard | DIN 6527 | DIN 6527 | Manufacturer’s standard | Manufacturer’s standard |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 50 degrees | 50 degrees | 50 degrees | 50 degrees |
| No. of teeth Z | 8 | 8 | 8 | 8 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |