{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master INOX solid carbide milling cutter with chip separators TPC 20 mm
Article no.: 203117 20
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 6
Product details
Technical Data
| Series | Master INOX | |
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 6 | |
| Helix angle | 36 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.1×D | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | TPC | |
| Flute length Lc | 60 mm | |
| Overhang length L1 incl. recess | 70 mm | |
| Recess ⌀ D1 | 19.8 mm | |
| Overall length L | 126 mm | |
| Shank ⌀ Ds | 20 mm | |
| Number of chip separators | 2 | |
| Corner chamfer width at 45° | 0.4 mm | |
| Corner chamfer angle | 45 degrees | |
| Average chip thickness hmax for TPC milling in INOX < 900 N/mm2 | 0.12 mm | |
| Colour ring | blue | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203117 20 | |
| EAN / GTIN | 4062406783709 | |
| Manufacturer number | 203117 20 |
Application Table
P
380
P
340
P
300
P
230
M
240
M
170
S
140
Description
Version:
High-performance milling cutter with irregular cutter spacing and irregular helical pitch. High process reliability and better chip evacuation due to increased flutes. Optimised carbide substrate for higher bending strength and extreme tool life, even in stainless steels in the high-performance field, especially duplex. Chip separator positioned offset at cutting edges.
Advantage:
Lower pull-out forces due to reduced helix angle.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
GARANT Master INOX solid carbide milling cutter with chip separators TPC 20 mm
on request
In stock
157 pieces in stock
US $ 499.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
135 pieces in stock
US $ 350.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
US $ 443.21
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
US $ 399.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
US $ 350.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
128 pieces in stock
US $ 289.38
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 70 | 74 | 70 | 74 | 74 | 74 |
| Corner chamfer angle | 45 | 45 | 45 | 45 | 45 | 45 |
| Overall length L | 126 | 126 | 126 | 124 | 126 | 126 |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Cutting edge ⌀ DC | 20 | 20 | 20 | 20 | 20 | 20 |
| Corner chamfer width at 45° | 0.4 | 0.3 | 0.35 | 0.2 | 0.3 | 0.3 |
| Series | Master INOX | Pro Inox | Master INOX | Master INOX | Pro Inox | Pro Inox |