{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill with internal coolant supply HPC 4 mm
Article no.: 202553 4
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | ZOX | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Flute length Lc | 8 mm | |
| Overhang length L1 incl. recess | 14 mm | |
| Recess ⌀ D1 | 3.7 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.035 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.045 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202553 4 | |
| EAN / GTIN | 4045197454386 | |
| Manufacturer number | 202553 4 |
Application Table
N
500
N
480
N
240
N
240
N
Description
Version:
Sturdy roughing end mills without knuckle profile.
With strong core, special chip breaker recesses and large polished flutes.
With strong core, special chip breaker recesses and large polished flutes.
Application:
For roughing milling with high demands on the component surface.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide end mill with internal coolant supply HPC 4 mm
on request
In stock
73 pieces in stock
US $ 78.36
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
36 pieces in stock
US $ 103.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
US $ 87.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3 pieces in stock
US $ 99.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
US $ 104.18
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | ZOX | TiAlN | AlCrN | AlCrN | TiAlN |
| Corner chamfer angle | 45 | 45 | 45 | 45 | 45 |
| Flute length Lc | 8 | 11 | 11 | 11 | 11 |
| Helix angle characteristic | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing |
| No. of teeth Z | 4 | 4 | 4 | 4 | 4 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Spacing of the cutters | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing |