{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Helix angle characteristic | unequal spacing | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Through-coolant | no | |
Machining strategy | MTC | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202244 8,5 | |
EAN / GTIN | 4045197654755 | |
Manufacturer number | 202244 8,5 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() Solid carbide milling cutter MTC 8,5 mm
on request
In stock
41 pieces in stock
US $ 74.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
142 pieces in stock
US $ 60.09
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
US $ 60.09
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
US $ 39.18
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling |
Colour ring | yellow | without | without | without |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HB to h6 | |
Helix angle | 30 degrees | 45 degrees | 45 degrees | |
Tolerance nominal ⌀ | e8 | e8 | e8 | |
Type | W | N | N | N |
Shank ⌀ Ds | 10 mm | 10 mm | 10 mm |