{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter MTC, uncoated, ⌀ DC: 11,5mm
Article no.: 202243 11,5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 11.5 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 26 mm | |
| Overhang length L1 incl. recess | 36 mm | |
| Recess ⌀ D1 | 10.5 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.05 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.07 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202243 11,5 | |
| EAN / GTIN | 4062406127466 | |
| Manufacturer number | 202243 11,5 |
Application Table
N
190
N
150
N
120
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Lengths similar to DIN 6527 long.
Lengths similar to DIN 6527 long.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.