{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill 1,2 mm
Article no.: 201630 1,2
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Cutting width ae for milling operation: Full slot cutting depth 1×D; 0.5×D for side milling
- Through-coolant: no
Product details
Technical Data
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Through-coolant | no | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201630 1,2 | |
| EAN / GTIN | 4045197264114 | |
| Manufacturer number | 201630 1,2 |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
P
60
M
80
M
60
K
90
Description
Version:
Eccentric relief ground for stronger cutting edges.
Size 0.25 to 2.5 - with double relief ground side clearance angle.
Tolerance: Size nominal ⌀ Dc = e8.
Size 0.25 to 2.5 - with double relief ground side clearance angle.
Tolerance: Size nominal ⌀ Dc = e8.
Application:
The intermediate sizes are especially for milling keyway slots.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide slot drill 1,2 mm
on request
In stock
205 pieces in stock
US $ 29.58
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
US $ 26.33
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
69 pieces in stock
US $ 31.19
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
157 pieces in stock
US $ 31.19
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
258 pieces in stock
US $ 20.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
53 pieces in stock
US $ 24.56
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | ||
| Colour ring | without | without | without | without | without | green |
| Cutting edge ⌀ DC | 1.2 mm | 1.2 mm | 1.2 mm | 1.2 mm | ||
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 45 degrees | 30 degrees | 45 degrees | 30 degrees | ||
| No. of teeth Z | 3 | 3 | 3 | 3 | ||
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |