{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM 25 mm
Article no.: 192541 25
Article code:
- Tool material: HSS PM
- Standard: DIN 844 B
- Milling profile: WR
- Tolerance nominal ⌀: js14
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 B | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | js14 | |
| No. of teeth Z | 3 | |
| Helix angle | 36 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 90 mm | |
| Overall length L | 166 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer width at 45° | 1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.09 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192541 25 | |
| EAN / GTIN | 4045197547651 | |
| Manufacturer number | 192541 25 |
Application Table
N
138
M
23
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
For the most demanding metal removal rates.
Centre cutting teeth for plunging.
- Wide, precision ground chip flutes.
- Special chip angle for aluminium and non-ferrous metals.
For the most demanding metal removal rates.
Advantage:
Suitable for high machining volumes due to the large flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Roughing end mill HSS-PM 25 mm
on request
In stock
9 pieces in stock
US $ 274.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
US $ 168.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
84 pieces in stock
US $ 225.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
US $ 199.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
US $ 241.55
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 | 45 | 45 | 45 | 45 |
| Colour ring | yellow | without | green | without | without |
| Overall length L | 166 | 121 | 121 | 121 | 121 |
| Through-coolant | no | no | no | no | no |
| Tolerance nominal ⌀ | js14 | js12 | ±0.12 | k12 | k10 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Corner chamfer width at 45° | 1 | 0.6 | 0.3 | 0.3 | 0.3 |