{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Semi-roughing end mill 18 mm
Article no.: 191640 18
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NF
- Tolerance nominal ⌀: k10
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 18 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 3 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 32 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.06 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191640 18 | |
| EAN / GTIN | 4045197104380 | |
| Manufacturer number | 191640 18 |
Application Table
N
83
P
30
P
25
P
25
N
55
Description
Version:
Universal end mill with relief ground semi-roughing profile.
Centre cutting teeth for plunging.
Eccentric relief ground.
Universal cutting edge geometry.
Centre cutting teeth for plunging.
Eccentric relief ground.
Universal cutting edge geometry.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Semi-roughing end mill 18 mm
on request
In stock
16 pieces in stock
US $ 77.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
US $ 68.68
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
51 pieces in stock
US $ 93.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
US $ 98.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
18 pieces in stock
US $ 45.16
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 | 45 | 45 | 45 | 45 |
| Milling profile | NF | NR | NR | WR | NR |
| Overall length L | 92 | 92 | 92 | 123 | 92 |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| No. of teeth Z | 3 | 3 | 3 | 3 | 4 |
| Corner chamfer width at 45° | 0.5 | 0.6 | 0.6 | 0.5 | 0.5 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |