{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drill 7 mm
Article no.: 191100 7
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: W
- Tolerance nominal ⌀: e8
- Number of effective teeth Z (peripheral side): 2
Product details
Technical Data
| Cutting edge ⌀ DC | 7 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| Number of effective teeth Z (peripheral side) | 2 | |
| Helix angle | 42 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Overall length L | 66 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed fz for slot milling in short-chipping aluminium | 0.018 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | yellow | |
| Type of product | Milling cutter |
Identification numbers & Classifications
| Article number | 191100 7 | |
| EAN / GTIN | 4045197100467 | |
| Manufacturer number | 191100 7 |
Application Table
N
150
N
37
P
28
Description
Version:
Centre cutting edge geometry for plunging. Wide, fine ground chip flutes. Exceptionally fine component surface finish - due to precisely ground cutting edges. For slots or for milling pockets from the component centre.
Note:
Note! Only for use in climb milling.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Slot drill 7 mm
on request
In stock
45 pieces in stock
US $ 34.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
438 pieces in stock
US $ 15.01
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
84 pieces in stock
US $ 30.98
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
272 pieces in stock
US $ 23.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
157 pieces in stock
US $ 27.94
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of effective teeth Z (peripheral side) | 2 | 2 | 2 | 2 | 2 |
| Corner chamfer angle | 90 | 90 | 90 | 90 | 90 |
| Colour ring | yellow | without | without | without | without |
| Overall length L | 66 | 60 | 60 | 60 | 80 |
| Shank tolerance | h6 | h6 | h6 | h6 | h6 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 |
| Type of product | Milling cutter | Milling cutter | Milling cutter | Milling cutter | Milling cutter |