{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Re-adjustable hand reamer 17 mm
Article no.: 160500 17
Article code:
- Tool material: HSS
- Standard: DIN 859
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 17 mm | |
| Tool material | HSS | |
| Standard | DIN 859 | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 67 mm | |
| Overhang L1 | 105 mm | |
| Overall length L | 175 mm | |
| Shank square □ | 12.5 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160500 17 | |
| EAN / GTIN | 4045197250728 | |
| Manufacturer number | 160500 17 |
Application Table
N
P
P
P
Description
Version:
Up to 5 mm with straight flutes; from 6 mm with left hand helix 7 − 8°. The reamer body is slit and can be adjusted by approx. 1/100 of the reamer ⌀ using the expansion screw (e.g. 20 mm ⌀ = 0.2 mm).
Application:
For opening through holes to a slight oversize. Use the straight fluted reamers only in holes which are not interrupted. Make sure that the screw is not left tightened when stored.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Re-adjustable hand reamer 17 mm
on request
Available in 6-8 weeks
0 pieces in stock
US $ 275.99
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
US $ 154.16
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 105 | 152 |
| Colour ring | without | without |
| Overall length L | 175 | 251 |
| Nominal ⌀ DC | 17 | 17 |
| Tool material | HSS | HSS |
| Application for type of drilling | for through hole | for through holes |
| Type of product | Phillips bit | Phillips bit |