{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 132680 M6
Machine tap HSS-E M6
Article no.: 132705 M6
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Swarf evacuation in the cutting direction.
Click to enlarge image
Click to enlarge image
- Thread type: M
- Flank angle: 60
- Tool material: HSS E
- Standard: DIN 371
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M6 | |
| Coating | TiN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E | |
| Standard | DIN 371 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2 6H | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1 mm | |
| Overall length L | 80 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank square □ | 4.9 mm | |
| Tapping hole ⌀ | 5 mm | |
| Thread ⌀ | 6 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | green | |
| Number of cutting edges Z | 3 | |
| Thread depth | 18 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 132705 M6 | |
| Manufacturer number | 132705 M6 |
Application Table
N
14
P
14
P
10
P
9
P
5
M
5
N
14
Description
Version:
Spiral point with oil grooves.
Guide section with oil grooves, but without chip flutes.
Low tendency to edge build-up.
Guide section with oil grooves, but without chip flutes.
Low tendency to edge build-up.
Tolerance class: ISO 2 6H
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
|
Machine tap HSS-E M6 |
on request
In stock
1,431 pieces in stock
US $ 31.99
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4,229 pieces in stock
US $ 7.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2,469 pieces in stock
US $ 17.90
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 3 | 3 | 3 | 3 |
| Number of clamping slots | 3 | 3 | 3 | 3 |
| Tapping hole ⌀ | 5 | 5 | 5 | 5 |
| Standard | DIN 371 | DIN 371 | DIN 371 | DIN 371 |
| Shank | Plain shank with h9 | Plain shank with h9 | Plain shank with h9 | Plain shank with h9 |
| Shank square □ | 4.9 | 4.9 | 4.9 | 4.9 |
| Tool material | HSS E | HSS E | HSS E | HSS E |