{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide drill plain shank DIN 6535 HA 180°, TiAlN, ⌀ DC m7: 10mm
Article no.: 122506 10
Article code:
Click to enlarge image
Plain shank DIN 6535 HA
Click to enlarge image
Click to enlarge image
With cutting edge chamfer (= 5% of the nominal ⌀)
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Version: 3×D
- Point angle: 180
- Shank: DIN 6535 HA to h6
- Use for drilling: limited convexity; limited cross-drilling; limited oblique spot drilling
Product details
Technical Data
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Version | 3×D | |
| Point angle | 180 degrees | |
| Shank | DIN 6535 HA to h6 | |
| Use for drilling | limited convexity; limited cross-drilling; limited oblique spot drilling | |
| Through-coolant | yes, with 25 bar | |
| Pilot drill required | yes, pilot drill | |
| Semi-Standard | yes | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122506 10 | |
| EAN / GTIN | 4045197647450 | |
| Manufacturer number | 122506 10 |
Application Table
P
85
P
75
P
60
P
50
M
45
K
90
Description
Version:
Special point geometry for generating 180° flat-bottomed holes. Low radial forces even when spot drilling on faces with up to 45° slope. Flute geometry for optimum chip evacuation. With 4 guide chamfers to stabilise the drill in the hole.
Advantage:
The 180° point angle permits drilling and counterboring in a single operation.
Recommendation:
When using the solid carbide 180° drill it is absolutely essential for process reliability:
- when spot drilling on flat surfaces to drill a pilot hole 1×D using pilot drill No. 122736.
- when spot drilling on sloping surfaces up to 15° : reduce the feed rate f to 50 %, up to 30°: reduce the feed rate f to 40 % and up to 45°: reduce the feed rate f to 25 % of the stated value. After spot drilling, the normal feed rate value can be used.
Note:
Flute length LC = L2 + 1.5 × DC.
Form HB and HE supplied at the same price as HA.
Form HB: order with No. 122506 + 129100HB .
Form HE: order with No. 122506 + 129100HE.
180° solid carbide drills for machining aluminium available on request.
Not suitable for generating counterbores for socket-head screws to DIN974-1.
Form HB and HE supplied at the same price as HA.
Form HB: order with No. 122506 + 129100HB .
Form HE: order with No. 122506 + 129100HE.
180° solid carbide drills for machining aluminium available on request.
Not suitable for generating counterbores for socket-head screws to DIN974-1.