{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Stub drill with 3 clamping faces HSS-E 20 mm
Article no.: 113001 20
Article code:
- Tool material: HSS E
- Standard: DIN 1897
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Nominal ⌀ DC | 20 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 1897 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Shank | Three drive flats shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 36 mm | |
| Flute length Lc | 66 mm | |
| Overall length L | 131 mm | |
| Shank ⌀ Ds | 12.5 mm | |
| Feed f in steel < 900 N/mm2 | 0.2 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 113001 20 | |
| EAN / GTIN | 4062406230661 | |
| Manufacturer number | 113001 20 |
Application Table
N
70
N
45
N
40
P
40
P
30
P
25
P
10
P
8
M
12
M
8
K
25
N
80
Description
Version:
Stable and sturdy stub drill with strengthened core diameter. Ground flutes, with high concentricity. Precision ground point.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Three drive flats on the shank for use in a 3-jaw chuck.
Shank ⌀ 12.5mm.
Shank ⌀ 12.5mm.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Stub drill with 3 clamping faces HSS-E 20 mm
on request
Subsequent delivery
0 pieces in stock
US $ 82.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
US $ 121.86
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
196 pieces in stock
US $ 122.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
US $ 141.83
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiN | uncoated |
| Through-coolant | no | no | no | no |
| Standard | DIN 1897 | DIN 1897 | DIN 1897 | Manufacturer’s standard |
| Shank | Three drive flats shank | Plain shank | Plain shank | Morse taper |
| Point angle | 130 | 130 | 130 | 130 |
| Tolerance nominal ⌀ | h8 | h8 | h8 | h8 |
| Type | N | N | N | H |