{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer configurable 12,5 mm
Article no.: 164180 12,5
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 12,5 | |
| EAN / GTIN | 4045197092328 | |
| Manufacturer number | 164180 12,5 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Machine reamer configurable 12,5 mm
on request
Available in 3-4 weeks
0 pieces in stock
US $ 124.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 3-4 weeks
0 pieces in stock
US $ 114.06
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
106 pieces in stock
US $ 61.31
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 151 mm | ||
| Through-coolant | no | no | no |
| Nominal ⌀ DC | 12.5 mm | ||
| Shank | Morse taper | DIN 1835 A to h6 | DIN 1835 A to h6 |
| Application for type of drilling | for through hole | for through holes | for through holes |
| Feed f in steel < 750 N/mm2 | 0.25 mm/rev. | ||
| Reaming oversize in diameter | 0.1 mm - 0.3 mm | ||