{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
POLICAP brusilna kapica PC okrogli valjček SiC Ø 10x15 mm SIC-COOL80 za aluminij
Št. art.: 4007220953754
Koda izdelka:
Upoštevajte daljši čas dostave in omejeno število nasvetov:
Ta izdelek za vas naročimo neposredno pri proizvajalcu, saj ni del naše glavne ponudbe in ga zato nimamo na zalogi.
InfoPodrobnosti o izdelku
Tehnični podatki
| Vrsta izdelka | Brusna kapica |
Identifikacijske številke in klasifikacije
| Številka izdelka | 4007220953754 | |
| EAN/GTIN | 4007220953754 | |
| Številka proizvajalca | 42302104 | |
| L-število | L51050 482 |
Opis
Description:
POLICAP abrasive caps in cylindrical shape with radius end WRC (previously shape C). POLICAP tools have a seamless design and the entire tool surface can be used. Ideal for working on components made from titanium, aluminium and their respective alloys. Excellent for use in aircraft and turbine construction and the associated maintenance work. The special type of grit and active grinding additive in the bond enable cool grinding, reduce the workpiece temperature, and prevent the chips from adhering. Colour code for silicon carbide SiC-COOL = grey
Feature:
- RPM, optimum: 20000 RPM
- Abrasive: Silicon carbide SiC/C-COOL
- Dia. external, metric: 10 mm
- Grit size: 80
- Height: 15 mm
Advantage:
- The abrasive caps and abrasive spiral bands are firmly held in place on the holder as the holder expands during use.
- Good dimensional stability and excellent fine grinding thanks to special manufacturing process.
- Easy tool change.
Application:
- Recommendations for use: To easily change the abrasive caps and abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the arbor clamped in the tool drive and attach. For the best results, use at a recommended cutting speed of 10-20 m/s.
- Applications: Step-by-step fine grinding; Leveling; Surface work
- Drive types: Flexible shaft drive; Straight grinder
Material:
- Materials that can be worked:
- Aluminium
- Annealed cast iron
- Brass
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
- Materials that can be worked: Aluminium; Annealed cast iron; Brass; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Thermoplastics; Titanium; Titanium alloys; Zinc
Note:
- The maximum permitted peripheral speed is 25 m/s.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.