{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
GARANT Softcut kotni rezkar 90° MTC 40/5 mm
Št. art.: 215575 40/5
Koda izdelka:
- Setting angle κ: 90
- Milling application: Pyöröjyrsimet; Parrastus; Kulmajyrsintä
- Spacing of the cutters: epätasainen
- Through-coolant: kyllä
- Machining strategy: MTC
Podrobnosti o izdelku
Tehnični podatki
| Series | Softcut® | |
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | reiällä | |
| Setting angle κ | 90 degrees | |
| Milling application | Pyöröjyrsimet; Parrastus; Kulmajyrsintä | |
| Spacing of the cutters | epätasainen | |
| Through-coolant | kyllä | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 16 mm | |
| ⌀ D3 | 37 mm | |
| Circular interpolation milling ⌀ Dmin | 77 mm | |
| Circular interpolation milling ⌀ Dmax | 78 mm | |
| Circular interpolation milling ap | 1.8 mm | |
| Ramping angle αmax | 0.5 degrees | |
| Ramping length L for αmax | 34.5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identifikacijske številke in klasifikacije
| Številka izdelka | 215575 40/5 | |
| EAN/GTIN | 4045197708144 | |
| Številka proizvajalca | 215575 40/5 |
Opis
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless steels.
Spare part:
Pack of insert screws No. 219826 (8IP; 2.2 Nm).